Rate & Fade For The Stack - ETC SmartFade User Manual

J u m p t o s t e p
It's possible to go directly to any step of the Stack with this function.
Action
Activate GOTO mode
R a t e & F a d e f o r t h e S t a c k
The RATE button can provide Rate and Fade override for the Stack. This will affect the
playback of the whole Stack temporarily. When a Rate or Fade override is cleared the
original times are retained.
F a d e
Activate RATE and press STACK.
Use the wheel to set a Fade % that will scale the fade times of the whole Stack. Fade 0%
means no fade. Original fade timing is not lost and may be recovered by clearing the Fade
%.
Rate
Activate RATE and press STACK. Then hold RATE.
Use the wheel to set a Rate % that will scale the total time of the whole Stack. Original
timing is not lost and may be recovered by clearing the Rate %.
R e s e t R a t e & F a d e
Action
1. Select Stack rate
2. Reset Rate
5
Playback
Console
(held)
STACK
Console
and
STACK RATE
and
CLEAR RATE
Feedback
As long as the button is held, the display will
allow you to scroll to any step.
Let go of STACK to transport the whole
sequence to this step in Next - ready for the
next crossfade.
Feedback
The rate and fade settings for the Stack will
be selected and shown in the display.
The rate and fade settings for the currently
selected stack/sequence will be reset and will
default back to its original times.
61