Buttons; Disable Recording; Crossfade Faders; Software Version - ETC SmartFade User Manual

B u t t o n s
You can set the overall intensity for the LED buttons. This is done from the Buttons menu.
Menu>Settings>[Buttons]
D i s a b l e R e c o r d i n g
Select OFF to allow recording and ON to disable recording.
Menu>Settings>[Recording]
C r o s s f a d e f a d e r s
The direction in which the Crossfade faders advance to the next step in STACK mode is set
in the Settings menu.
Menu>Settings>[Crossfade faders]
There are two choices of behavior
• Upwards only, meaning that you will need to pull the faders back to the bottom before
fading "up" into the next cue.
• Both ways, meaning that each time you move the faders from bottom-to-top or top-to-
bottom you will fade into the next cue in the stack.
S o f t w a r e V e r s i o n
You can verify what software version your console is running in the Diagnostics menu.
Menu>Diagnostics>[Software version]
2
Setup 25