Sequence & Stack Times - ETC SmartFade User Manual

S e q u e n c e & S t a c k T i m e s
Each Sequence step can have three times, Up, Down and Wait. In addition to these times
there is an overall Rate and Fade time that affect the whole Sequence. These times are set/
changed during playback.
D e f a u l t F a d e T i m e s
Step 1:
Step 2:
Step 3:
Step 4:
Menu choice
U>
D>
W>
Step 5:
Rate
The RATE button can provide Fade controls for the Stack. This will affect the playback of
the whole Stack.
Press RATE (with STACK active).
Use the wheel to set a balance between the fade and the wait time for all steps. Fade 0%
means no fade.
52
Open the Set Sequences menu:
Menu>[Sequences]
Use the wheel to select a Sequence (1-24) or the Stack (XF).
Press (MENU) to confirm.
Use the wheel to select Step Timing.
Press (MENU) to confirm.
Use the wheel to select Default Times.
Use (MENU) to step between choices, and wheel to set a value.
Console
Wheel
Wheel
Wheel
Use EXIT to end and exit.
Feedback
Default Up times
Default Down times
Default Wait times
SmartFade v3.0.1 User Manual