Water Calibration; Ice Calibration - lancer BLENDPOINT Operation Manual

Water Calibration

1. From the Home Screen, press the Main Menu button.
2. Press Calibrate.
MENU
Replace
Inventory
Product
Manual
Fault History
Controls
Home Back
3. Press Calibrate Water.
CALIBRATE
Calibrate Calibrate
Product Water
Home Back

Ice Calibration

NOTE
Water must be calibrated before calibration of the ice,
otherwise the unit will not calibrate the ice properly.
1. From the Calibrate Screen in the Main Menu, press
Calibrate Ice.
CALIBRATE
Calibrate Calibrate
Product Water
Home Back
8
Cleaning Calibrate
Machine
About
Lockout
Calibrate
Ice
Main Menu
Calibrate
Ice
Main Menu
4. Place an empty Jar in the Blend Station and press Next.
CALIBRATE WATER
Place empty jar in machine and press next to start calibration...
Next
Home Back
5. Once completed record how many ounces of water were
dispensed by typing amount on keypad and pressing √.
CALIBRATE WATER
Enter volume water in jar
0.0
Volume
ounces
Home Back
6. Empty Jar and replace in blend station.
2. Make sure there is an empty Jar in the Blend Station, then
press Next.
NOTE
Water and ice will be dispensed, this is necessary to
perform an accurate calibration.
CALIBRATE ICE
Place empty jar in machine and press next to start calibration...
Next
Home Back
Main Menu
1 2 3
4 5 6
7 8 9
0
Main Menu
Main Menu