Pre-Installation Checklist - lancer BLENDPOINT Operation Manual

TOOLS REQUIRED:
Oetiker Pliers
Tubing Cutters
Wrench
Phillips Screwdriver
BEFORE INSTALLATION:
Do you have enough space to
install the dispenser?
Is dispenser located away from
direct sunlight or overhead
lighting?
Read This Manual
This manual was developed by Lancer Corporation as a reference guide for the owner/operator and
installer of this dispenser. Please read this manual before installation and operation of this
dispenser. Please see pages 16-17 for troubleshooting or service assistance. If the service cannot
be corrected please call your Service Agent or Lancer Customer Service. Always have your model
and serial number available when you call.

PRE-INSTALLATION CHECKLIST

POST MIX ACCESSORIES:
Beverage Tubing
Oetiker Clamp Fittings
CONSIDER LOCATION OF THE
FOLLOWING BEFORE THE INSTALL:
Water Supply Lines
Drain
Electrical Outlet
Heating and Air Conditioning
Ducts
5