Huawei NetCol5000-A User Manual page 26

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
Figure 2-7 Screw thread connector
Installation requirements
Table 2-8
When the total load of servers, relative to a single smart cooling product, is less than 10 kW,
the humidity might be relatively high. It has no relationship with product quality, and you are
recommended to install a dehumidifier.
Table 2-8 Installation requirements
Name
Room
Installation mode
Pipe and cable routing
Length of one-way
refrigerant pipes
Vertical distance
between indoor unit and
outdoor unit
Issue 13 (2019-01-15)
BSPP 1/2 inch: Large diameter: 20.955 mm; medium diameter: 19.793 mm; small diameter: 18.631 mm;
medium diameter tolerance: 0–0.142 mm; small diameter tolerance: 0–0.541 mm.
describes the installation requirements of NetCol5000-A.
Copyright © Huawei Technologies Co., Ltd.
Specifications
The room can be sealed well.
Width ≥ 0.9 m; height ≥ 2.3 m.
Load bearing capacity ≥ 350 kg/m
mm.
Installed on a concrete floor or an raised floor.
Overhead or underfloor piping and cabling bottom.
Self-drainpipe only supports underfloor piping.
≤ 60 m.
 If the outdoor unit is placed higher than the indoor unit, the
maximum vertical distance between them is 20 m.

If the indoor unit is placed higher than the outdoor unit, the
maximum vertical distance between them is 5 m.
2 Product Description
; height of underfloor ≥ 250
2
17