NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
The community contains 6–15 characters and must contain at least two types of characters.
Step 3 Set Read Community and Write Community.
1.
2.
Step 4 Add an SNMPv3 user.
1.
2.
Issue 13 (2019-01-15)
Click the text box after Read Community, as shown in
Community as planned, click
Figure 4-10 Setting read community
Click the text box after Write Community, as shown in
Community as planned, click
Figure 4-11 Setting write community
Click Add under SNMP V3.
Enter a planned value for User Name, select values for Auth. Protocol and Prop.
Protocol from drop-down list boxes, and click
MD5 and DES protocols are not secure. It is recommended that you set Auth. Protocol
to SHA, and set Prop. Protocol to AES. The following operations use the recommended
settings as an example.
Copyright © Huawei Technologies Co., Ltd.
Figure
, and then click Submit.
Figure
, and then click Submit.
, as shown in
4 ACC Introduction
4-10. Set Read
4-11. Set Write
Figure
4-12.
91