THORLABS K-Cube Piezo Controller User Manual page 8

Chapter 2
automatically when a user (client) application is making software calls into the same
Control. For example, if a client application instructs the associated Piezo Control to
move an actuator, the progress of that move is reflected automatically by changing
position readouts on the graphical interface, without the need for further programming
intervention.
The Kinesis Controls collection provides a rich set of graphical user panels and
programmable interfaces allowing users and client application developers to interact
seamlessly with the Kinesis hardware. Each of the Kinesis controllers has an
associated .Net Control and these are described fully in the handbooks associated
with the controllers.
Fig. 2.2 System Architecture Diagram
Refer to the main Kinesis Software online help file, for a complete programmers
guide. This is available either by pressing the F1 key when running the Kinesis server,
or via the Start menu, Start\Programs\Thorlabs\Kinesis\Kinesis Help.
2.3.3 Software Upgrades
Thorlabs operate a policy of continuous product development and may issue software
upgrades as necessary.
8 HA0365T Rev Dk Jan 2017