Trigger Setup - Panasonic ELC500 User Manual

5.6.3

Trigger Setup

In order to perform a data collection, logging file update, write data, send mail, special control, etc., it is
necessary to setup the timing to execute them in advance. The timing is called 'Trigger'.
You can open the window by 2-way the below.
(1) Select [Setup] and click [Trigger].
(2) Click icon on tool bar
■System trigger
There are 'System trigger' and 'User trigger'.
7 types of trigger setting are set to system trigger.
System trigger is not possible to neither edit nor delete.
In order to change and add trigger, use 'User trigger'.
<Setting system triggers>
Trigger name
5 seconds interval
1 minute interval
15 minutes interval
30 minutes interval
60 minutes interval
Every day 00:00:05
Every month _/01 00:00:05
A trigger occurs on the basis of the hour.
Ex.) In case of 5 seconds interval
Trigger occur time: 0-sec, 5-sec, 10-sec, ..... 50-sec, 55-sec.
Condition
Fixed cycle Trigger occurs at 5-sec interval.
Fixed cycle Trigger occurs at 1- min interval.
Fixed cycle Trigger occurs at 15- min interval.
Fixed cycle Trigger occurs at 30- min interval.
Fixed cycle Trigger occurs at 60- min interval.
Appointed time Trigger occurs at every day 00:00:05.
Trigger occurs at 00:00:00 on the 1
Appointed time
month.
75
ELC500 Control unit
Description
st
of every