Chapter 4 Check Before Power On; Check Items Befotr Power On - Panasonic ELC500 User Manual

Chapter 4 Check Before Power On
4.1

Check Items Befotr Power On

Once you complete the installation and wiring, check the below items before power on.
■Check items
Item
1 Unit connection
2 Installation
3 Wiring
4 Connection cable
5 Setup of ELC500
6 Others
- Does each unit match the device list of system design?
- Are unit mounting screws properly tightened?
- Has the dust-proof sheet been removed from the unit?
- Does each unit installed so that it doesn't fall down?
- Does each unit installed so that there is no water or dust?
- Are terminal screws properly tightened?
- Does wiring of terminal match the signal name?
- Does wiring have sufficient thickness for expected current?
- Is cable securely connected?
- Are connection cables properly connected?
- Does Mode switch set to STOP/PROG.?
- Does Card operation switch set correct?
Carefully check if there is any potential for an accident.
34
Descriptions
ELC500 Control unit