Panasonic ELC500 User Manual page 74

5.6.1.4 Clock setup
Set time of ELC500.
Unstable data is set at initial. Be sure to set the correct date and time before use.
■Manual setup
Set time manually.
Item
(a) Clock
(b) Time zone
■Auto time setup
Set time by synchronizing to SNTP server.
Item
(c) Use SNTP
(d) How to specify SNTP
server
(e) IP address or Hostname
*2
(f) Automatic acquisition
timing
*1 In case of select 'Transfer PC date time', it transfer the time (including time zone) of PC directly.
In case of select 'Transfer the below date time', it transfer the time you input directly.
*2 Confirm your system administrator about SNTP server address.
*3 In case of select 'Hostname'
Description
Select the way to transfer time.
Select one and click [Setup], it will update time of ELC500. *1
Select time zone.
It is used for mail function and SNTP function.
<Initial> GMT+00:00
<Set range>GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/
GMT-08:00/GMT-07:00/GMT-06:00/GMT-09:00/
GMT-05:00/GMT-04:00/GMT-03:00/GMT-02:00/
GMT-01:00/GMT+00:00/GMT+01:00/GMT+02:00/
GMT+03:00/GMT+04:00/GMT+05:00/GMT+06:00/
GMT+07:00/GMT+08:00/GMT+09:00/GMT+10:00/
GMT+11:00/GMT+12:00
Description
Select to use the function or not.
<Initial> without check = not available
Set the way to specify SNTP server.
<Initial> IPv4 address
<Set range> IPv4 address / Hostname
Set SNTP server address
<Set range> 64-letter or less *3
Set timing to synchronize clock to SNTP server
Check the box to set.
<Initial> without check
<Set range> Power ON / Every month / Every week /
Everyday
66
ELC500 Control unit
(a)
(b)
(c)
(d)
(e)
(f)