Panasonic ELC500 User Manual page 76

5.6.1.5 Option setup
Set other items related to data collecting.
Item
(a) Create a MOD file when
RUN => STOP/PROG.
(b) Use most recent data for
logging data.
(c) Transfer logging data to
registers.
(d) Transfer logging data
in 4 words.
(e) Transfer demand data to
registers.
Description
Select to use the function or not.
<Initial> with check = available
Select to use the function, if a communication error is
happened at logging trigger timing, it uses the reading data
after the last trigger timing, or not.
<Initial> with check = available
Select to use the function, it transfers logging data to DT
registers, or not.
<Initial> with check = available
Set saved word unit of the logging data.
With check = save with 4 words.
Without check = save with 2 words
<Initial> without check = 2 words
*This setting is used for all DT registers.
Select to use the function or not.
<Initial> with check = available
68
ELC500 Control unit
(a)
(b)
(c)
(d)
(e)