Special Internal Relay(R) - Panasonic ELC500 User Manual

9.5

Special Internal Relay(R)

ELC500 uses the following special interenal relays. Do not use them and do not write to the relay
number not listed.
These relays can be referred by MEWTOCOL. (It doesn't support MODBUS.)
Relay No.
R11030 LOG0 data transfer words
R11031 LOG1 data transfer words
R11032 LOG2 data transfer words
： ：
R1103E LOG14 data transfer words
R1103F LOG15 data transfer words
R11040 DT registers transfer 1
R11041 DT registers transfer 2
R11042 Demand data clear
Name
Number of data transfer words of logging device registered in LOG0
(<Initial> 0
Number of data transfer words of logging device registered in LOG1
(<Initial> 0
Number of data transfer words of logging device registered in LOG2
(<Initial> 0
：
Number of data transfer words of logging device registered in LOG14
(<Initial> 0
Number of data transfer words of logging device registered in LOG15
(<Initial> 0
Transfer collected logging data to DT register or not
(<Initial> 1
Transfer collected logging data to DT register or not
(<Initial> 1
Clear demand data or not (<Initial> 1
Description
0: 2 words, 1: 4 words)
0: 2 words, 1: 4 words)
0: 2 words, 1: 4 words)
0: 2 words, 1: 4 words)
0: 2 words, 1: 4 words)
0: not transfer, 1: transfer)
0: not transfer, 1: transfer)
174
ELC500 Control unit
0: not clear, 1: clear)