Panasonic ELC500 User Manual page 63

[4] Mail send
Set to use mail sending function.
Item
(a) Use mail sending function
(b) Name
(c) Mail address
(d) IP address or Hostname
(e) Port No.
(f) Use SMTP authentication
(g) Authentication method
(h) Account
(i) Password
(j) Use SSL3/TLS1
(k) Sending mail max. size
(l) Connection timeout
(m) Retry interval
(n) Retry count
Description
Select use the function or not.
<Initial> without check = not available
Set mail sender name.
<Set range> 32-letter or less
Set mail address of ELC500
<Set range> 256-letter or less
Set IP address or name of SMTP server.
<Set range> 256-letter or less
Set port number of SMTP server.
<Initial> 25
<Set range> 1 to 65535
Select use SMTP authentication or not.
<Initial> without check = not available
Select SMTP authentication method.
<Initial> CRAM-MD5
<Set range>
CRAM-MD5 /PLAIN(ID/PASS) /PLAIN(ID/ID/PASS) /LOGIN
Set account to use for SMTP authentication.
Set password to use for SMTP authentication.
Select use SSL3/TLS1 authentication or not
<Initial> without check = not available
Set max. size for sending mail.
<Initial> 100KB
<Set range> 1 to 1024KB
Set timeout time to disconnect the connection.
<Initial> 60 sec.
<Set range> 30 to 300
Set retry interval to send mail.
<Initial> 60 sec.
<Set range> 10 to 86400
Set retry number to send mail.
<Initial> 3 times
<Set range> 0 to 3
55
ELC500 Control unit
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)
(m)
(n)