Disabling Proxy Settings In Safari; Disabling Firewall And Security Software; Confirming The Gateway's Online Status; Confirming Your Computer's Link Status - SMC Networks SMCD3GNV3 User Manual

錯誤 錯誤! 使用 錯誤 錯誤

Disabling Proxy Settings in Safari

The following procedure describes how to disable proxy settings in Safari.
1. Start Safari.
2. Click the Safari menu and select Preferences.
3. Click the Advanced tab.
4. In the Advanced tab, click the Change Settings button.
5. Choose your location from the Location list (this is generally Automatic).
6. Select your connection method. If using a wired connection, select Built-in Ethernet. For
wireless, select Airport.
7. Click the Proxies tab.
8. Be sure each proxy in the list is unchecked.
9. Click Apply Now to finish.

Disabling Firewall and Security Software

Disable any firewall or security software that may be running on your computer. For more
information, refer to the documentation for your firewall. After you configure the Gateway,
please re-enable your computer firewall.

Confirming the Gateway's Online Status

Confirm that the Online LED on the Gateway front panel is ON (see Figure 1 on page 13). If
the LED is OFF, replace the coaxial cable connecting the Gateway to the cable service. If
the Online LED does not go ON after several minutes, please contact your cable provider to
confirm that the service is active.

Confirming Your Computer's Link Status

Be sure there is an Ethernet cable connecting your computer to the Gateway. Then confirm
that the LEDs for the Gateway port connected to your computer are blinking. If the LEDs are
OFF, the connection between your computer and Gateway is not working properly.
使用 [常用 使用 使用 常用] 索引標籤將 常用 常用 索引標籤將 Heading 1 套用到您想要在此處顯示的文字 索引標籤將 索引標籤將
SMCD3GNV Wireless Cable Modem Gateway User Manual
套用到您想要在此處顯示的文字。 。 。 。 套用到您想要在此處顯示的文字 套用到您想要在此處顯示的文字
35