Replacing The Fan - Husqvarna 536LiL Workshop Manual

9.9 Replacing the fan

For products with S/N: -2015080000 (536LiL),
-2015100000 (536LiR).
Always replace a damaged fan with a new one.
1
Disconnect the fan and lift it out of the battery
housing.
2
Connect the fan and place it in the battery housing
with the rotating part turned out from the battery
housing and the text on the hub in/down.
Always use original spare parts.
See Figure 20a.
Replacing the fan
For products with S/N: 2015080001- (536LiL,
536LiLX), 20151000001- (536LiR, 536LiRX).
Always replace a damaged fan with a new one.
1
Disconnect the connector to the control unit and
the connector to the keypad plus the connector
and contact to the main switch.
2
Place the fan in the battery housing with the rotat-
ing part turned out from the battery housing and
the text on the hub in/down.
Connect all connectors and contacts.
Always use original spare parts.
See figure 20b.
Fig 20a
Fig 20b
Repair Instructions
– 49
English