Cooling fan failure service check
Action
Step 1
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Motor tests > Fan
(main)
b
Touch Start.
Does the fan spin?
Step 2
a
Remove the right cover. See
page
186.
b
Reseat the fan cable from the controller board.
Does the problem remain?
Step 3
Replace the fan. See
Does the problem remain?
6yy errors
600‑611 error messages
Error code Description
600.01
Toner tally from the RIP was not received.
600.02
Video did not start.
600.04
Duplex page was not picked.
600.05
Invalid PH NVRAM Type error was detected.
600.06
Paperport driver is unresponsive.
600.07
Page is at image point before EP is ready.
600.09
EP update error was detected.
600.10
EP late run‑in error was detected.
600.95
RIP intentionally declared a jam error, usually to
prevent a kiosk user from printing free pages.
602.19
Tray 1 was unable to be ready for picking.
602.29
Tray 2 was unable to be ready for picking.
602.39
Tray 3 was unable to be ready for picking.
602.49
Tray 4 was unable to be ready for picking.
"Right cover removal" on
"Cooling fan removal" on page
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Go to step 3.
Contact the next
level of support.
190.
Action
See
"Engine error service check" on
page
129.
128
4600-830, -835, -895
No
Go to step 2.
The problem is
solved.
The problem is
solved.