Actions
Step 1
Adjust the guides in the tray according to the size of the paper
loaded.
Does the problem remain?
Step 2
Do one of the following:
•
From the printer control panel, set the paper size in the Paper
menu to match the paper loaded in the tray.
•
Change the paper loaded in the tray to match the paper size
specified in the tray settings.
Does the problem remain?
Step 3
Depending on your operating system, specify the paper size from
Printing Preferences or from the Print dialog.
Does the problem remain?
Step 4
a
Enter the Diagnostics menu, and then select Registration.
b
Adjust the margins as necessary.
Does the problem remain?
Toner rubs off check
Note: Before performing this print quality check, go to the control panel home screen and navigate to
Settings > Troubleshooting > Print Quality Test Pages, and then perform the Initial print quality check. See
"Initial print quality check" on page
26.
Diagnostics and troubleshooting
63
4600-830, -835, -895
Yes
No
Go to step 2.
The problem is
solved.
Go to step 3.
The problem is
solved.
Go to step 4 or
The problem is
contact the next
solved.
level of support.
Contact the next
The problem is
level of support.
solved.