Lexmark B2650 Service Manual page 87

Error code Description
202.33 Paper fed from tray 3 never reached the sensor
(fuser exit).
202.35 Paper fed from tray 3 never cleared the sensor
(fuser exit).
202.43 Paper fed from tray 4 never reached the sensor
(fuser exit).
202.45 Paper fed from tray 4 never cleared the sensor
(fuser exit).
202.91 Paper remains detected at the sensor (fuser exit)
after the printer is turned on.
202.93 The sensor (fuser exit) detected a jam during or
after a flush action.
Sensor (fuser exit) jam at leading edge service check
Action
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
Does the problem remain?
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Input tray quick print
b
Do feed tests from different trays. Check if the same error
occurs.
Does the same problem remain?
Step 3
Check if the fuser cam is functional and free of damage.
Is the fuser cam functional and free of damage?
Step 4
Replace the fuser cam. See
page 182.
Does the problem remain?
Step 5
a
Reseat the fuser cables from the controller board.
b
Reseat the fuser cable from the LVPS.
c
Reseat the fuser cable from the extension cable.
Does the problem remain?
"Avoiding jams" on page
"Fuser actuator removal" on
Diagnostics and troubleshooting
Action
See "Sensor (fuser exit) jam at leading edge
service check" on page
See "Sensor (fuser exit) jam at trailing edge
service check" on page
See "Sensor (fuser exit) jam at leading edge
service check" on page
See "Sensor (fuser exit) jam at trailing edge
service check" on page
See "Sensor (fuser exit) static jam service check"
on page 89.
Yes
Go to step 2.
66.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 6.
87
4600-830, -835, -895
87.
88.
87.
88.
No
The problem is
solved.
Go to step 7.
Go to step 4.
The problem is
solved.
The problem is
solved.