Lexmark B2650 Service Manual page 47

Actions
Step 7
Perform a print test.
From the Diagnostics menu, select PRINT TESTS > Tray [x].
Note: [x] refers to the tray where the skewed prints are sourced
from.
Does the problem remain?
Step 8
Adjust the margins.
From the Diagnostic menu, select REGISTRATION.
Does the problem remain?
Step 9
Check the guides in the MPF tray.
Does the position of the guides match the paper loaded?
Step 10
Adjust the guides to match the paper loaded.
Does the problem remain?
Step 11
Check if the printer supports the paper loaded.
Note: For a complete list of supported paper, see the printer
User's Guide.
Is the paper supported?
Step 12
Remove the paper, and then load a supported one.
Does the problem remain?
Step 13
Check the MPF pick roller for excess wear and contamination.
Is the MPF pick roller free from excess wear and contamination?
Step 14
Replace the MPF pick roller. See
pad removal" on page 209.
Does the problem remain?
"MPF pick roller and separator
Diagnostics and troubleshooting
47
4600-830, -835, -895
Yes No
Go to step 8. The problem is
solved.
Go to step 15. The problem is
solved.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 13. Go to step 12.
Go to step 13. The problem is
solved.
Go to step 15. Go to step 14.
Go to step 15. The problem is
solved.