3.3 Positioning the SRD in the UltiMate 3000 System
If the SRD is part of an UltiMate 3000 system, for example, for analytical HPLC
applications, you should stack the individual modules, for example, as shown in Fig. 4 and
interconnect them on the rear panel as shown in Fig. 5. The arrangement of the system
modules depends on the application.
Fig. 4: Module arrangement for an UltiMate 3000 system (example)
If the solvent rack is part of an UltiMate 3000 RSLCnano system or Proteomics MDLC
system, the related system manual ('UltiMate RSLCnano - Standard Applications' or
'UltiMate 3000 Proteomics MDLC - System Installation and Application') provides
information about how to arrange the modules and set up the system for these applications.
Operating Instructions
UltiMate 3000 Series:
SRD-3x00 Solvent Racks
Solvent Rack
Pump
Autosampler
Column compartment
Detector
Page 19