Intended Use - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

1.3 Intended Use

For Research Use Only. Not for use in diagnostic procedures. The device is designed to be
operated only be qualified and authorized personnel. All users must know the hazards
presented by the device and the used substances.
The SRD has been developed as part of the UltiMate 3000 system and is a reliable module
for the secure and functional positioning of the solvent reservoirs and for automatic
degassing of typical HPLC (high performance liquid chromatography) solvents. The SRD
is controlled by the Chromeleon Chromatography Management System from the HPLC
pump of the UltiMate 3000 system. However, the SRD can be used with other HPLC
systems if adequate control inputs and outputs are available.
Being part of the UltiMate 3000 system, the SRD (and the pump) can also be operated with
other data systems, such as
• Xcalibur™, Compass™/HyStar™, or Analyst
To do so, installation of the DCMSLink (Dionex Chromatography Mass Spectrometry
Link) software is required in addition to the installation of the data system.
Empower™
•
Installation of the Dionex Instrument Integration Software is required in addition to the
installation of the data system.
For more information, contact the Thermo Fisher Scientific sales organization for Dionex
HPLC Products.
Operation in stand-alone mode is possible as well.
Note that the SRD may be operated only with accessories and spare parts recommended by
Thermo Fisher Scientific (→ page 51) and within its technical specifications (→ page 49).
If there is any question regarding appropriate usage, contact Thermo Fisher Scientific before
proceeding.
Thermo Fisher Scientific cannot be held liable for any damage, material or otherwise,
resulting from inappropriate or improper use of the instrument.
Warning:
Operating Instructions
If the device is used in a manner not specified by Thermo Fisher
Scientific, the protection provided by the device could be impaired.
Thermo Fisher Scientific assumes no responsibility and will not be
liable for operator injury and/or instrument damage. Whenever it is
likely that the protection is impaired, the instrument must be
disconnected from all power sources and be secured against any
intended operation.
SRD-3x00 Solvent Racks
®
UltiMate 3000 Series:
Page 9