Gas Supply Requirements - Maytag MDE17CS Service Manual

using the universal cord included with this
dryer:
The gas dryer is equipped with a universal
cord with interchangeable plugs.
1. To use the universal cord, select the plug
end that fits the electrical outlet, and plug it
into the adapter on the supply cord.
2. Secure the plug end in place on the cord
by aligning the 2 cover halves over the cord
adapter and clipping them together.
GaS SuPPlY
rEQuirEMENTS
WARNING
Connect this dryer to a regulated gas supply.
Supply pressure must be in accordance with
the Technical Specifications (see page 2-12).
Install a shut-off valve.
Securely tighten all gas connections.
If connected to LP, have a qualified person
make sure gas pressure is correct.
Failure to do so can result in death,
explosion, or fire.
iMPOrTaNT: Observe all governing codes
and ordinances.
Gas Supply
Before installation, check that the local gas
distribution conditions, nature of gas and
pressure, and the adjustment of the appliance
are compatible. Burner information will be
found on the model/serial rating plate in the
door recess of the dryer. If this information
does not agree with the type of gas available,
see the dealer.
2-10
Explosion Hazard