Reversing A Solid Dryer Door - Maytag MDE17CS Service Manual

rEvErSiNG a SOliD DrYEr DOOr

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Dryer models produced after January 1,
2009 should have reversible doors. To
know if the doors are reversible, look for the
white plastic hinge hole covers at the non-
hinged side of the door as shown here.
2. To reverse the door, first remove the door
from the dryer (See page 4-18).
White Plastic
Hinge Hole
Cover
3. Disassemble the door (See page 4-20).
4. Rotate the front panel 180 degrees.
5. Reassemble the door with the hinges on the
opposite end of the door.
6. Remove the two hinge hole covers from the
front panel frame by removing two star head
screws from each cover (See photo left
column).
7. Install these covers over the hinge holes on
the opposite side of the front panel frame.
8. Reattach the door to the dryer with the door
swing in the opposite direction.
4-19