Maytag MDE17CS Service Manual page 18

CODE EXPLANATION
SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
Not Selected 'OFF'.
Selected 'ON'. Press DELICATES button once for this selection.
If SPECIAL PRICING OPTION is selected, there is access to codes
'3.' through '9.'
Press PERM. PRESS button once to advance to next code.
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
SPECIAL CYCLE PRICE
Represents the number of coins (coin 1) to start the dryer; may
adjust from 0–39. (See b.xx set-up for VALUE OF COIN 1). Advance
from 0–39 by pressing WHITES & COLORS. Factory default of
6 x coin 1.
PN MODELS: Factory default of 0 coins.
Press PERM. PRESS button once to advance to next code.
SPECIAL DRY TIME
Represents the number of minutes per coin (coin 1).
Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
By pressing the WHITES & COLORS button, the value
can be adjusted from 1–99 minutes.
PN MODELS: Represents the cycle length for free cycles.
As example: '4.45' = 45 minutes.
Press PERM. PRESS button once to advance to next code.
TIME-OF-DAY CLOCK, MINUTES
This is the TIME-OF-DAY CLOCK, minute setting; select
0–59 minutes by pressing WHITES & COLORS button.
Press PERM. PRESS button once to advance to next code.
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses the 24 hr. clock.
This is the TIME-OF-DAY CLOCK, hour setting; select 0–23 hours
by pressing WHITES & COLORS button.
Press PERM. PRESS button once to advance to next code.
SPECIAL PRICE START HOUR
NOTE: Uses the 24 hr. clock.
This is the start hour; 0–23 hours. Select START HOUR
by pressing WHITES & COLORS button.
Press PERM. PRESS button once to advance to next code.
SPECIAL PRICE STOP HOUR
NOTE: Uses the 24 hr. clock.
This is the stop hour; 0–23 hours. Select STOP HOUR
by pressing WHITES & COLORS button.
Press PERM. PRESS button once to advance to next code.
SPECIAL PRICE DAY
This represents the day of the week and whether special pricing
is selected for that day. A number followed by '0' indicates no
selection that particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S).
Day of week (1-7) can be chosen by pressing the WHITES &
COLORS button. Press DELICATES button once to select
special pricing for each day chosen.
When exiting setup code '9.', the display must show current day
of week:
DISPLAY DAY OF WEEK
10 Day 1= Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
Press PERM. PRESS button once to advance to next code.
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
1-10
CODE EXPLANATION
VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
Not Selected 'OFF'.
Selected 'ON'. Press DELICATES button once for this selection.
When selected, the money and/or cycle counts will be viewable
(if counting is selected) when the coin box is removed.
Press PERM. PRESS button once to advance to next code.
VALUE OF COIN 1
This represents the value of coin 1 in the quantity of 5% increments
of the larger coin value. 5 x 5% = 25%.
By pressing the WHITES & COLORS button, there is the option
of 1–199 for the quantity of 5% increments.
With coin slide activation, this represents the total vend price.
Press PERM. PRESS button once to advance to next code.
VALUE OF COIN 2
This represents the value of coin 2 in the quantity of 5% increments
of the larger coin value. 20 x 5% = 100%.
By pressing the WHITES & COLORS button, there is the option
of 1–199 for the quantity of 5% increments.
PN MODELS: This represents the value of coin 2 in the quantity of
5% increments of the larger coin value. Factory default = 5 x 5% of
the larger coin value.
PN MODELS USING ENHANCED DEBIT: This represents the value of
top off in quantity of 5% increments of the larger coin value. Factory
default = 5 x 5% of the larger coin value.
Press PERM. PRESS button once to advance to next code.
COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
Replacement of meter case will be needed for coin slide mounting.
Not Selected 'OFF'.
This option is not available on this model and should not be used.
NOTE: If CS option is selected, coins will not be recognized and any
coins inserted will be lost by the user.
Press PERM. PRESS button once to advance to next code.
ADD COINS OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
This option causes the customer display to show the number
of coins (coin 1) to enter, rather than the amount.
Not Selected 'OFF'.
Selected 'ON'.
Press DELICATES button 3 consecutive times for this selection.
PN MODELS ONLY: In enhanced debit mode, this option is not
selectable.
Press PERM. PRESS button once to advance to next code.