rEMOvE OuTlET Grill aND liNT FilTEr DOOr
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Open the dryer door and remove the lint
filter.
2.
Remove two star head screws below the
dryer door opening.
Two Star
Head Screws
3.
Remove three star head screws from the
inside of the dryer to remove the outlet grill.
The middle lower screw is smaller than the
other two screws.
Three Star
Head Screws
4-22
4.
After removing the outlet grill the lint filter
door can be removed by pulling it out of the
mounting slots in the front panel toward the
inside of the dryer.
5.
Separate the two halves of the outlet grill by
pulling them apart.
6.
The lint filter door has a spring on one end
of the door that keeps it closed when filter
is not in place.
Lint Filter
Door Spring