Brother DCP-J4110DW Service Manual page 346

Selector
No.
Prevention of stains on back side of
1 leading edge of paper in borderless
printing
2 Not used.
Protection of platen from no-paper
3
printing to prevent stains
(Functional restriction on the paper
4
width sensor)
Assurance print 1
5 (Printing with black and cyan inks in
monochrome copy)
Assurance print 2
(Printing with black and cyan inks in
6
monochrome FAX reception and in list
output)
Workaround for false jam detection
7
(Functional restriction on the paper
8
width sensor)
• Selector 1: Prevention of stains on back side of leading edge of paper in borderless printing
Setting this selector to "1" reduces the protruding amount of the leading edge of recording
paper to the platen groove to minimize stains that could be caused by ink mist on the back
side of the leading edge. Enabling this function reduces the throughput than disabling it.
AMS01
(Printing assurance 1)
Function
5-67
Setting and Specifications
0: Disable (default)
No. 3 4
0 0 : Enable (Determine the sensor
function depending upon the print
resolution selected) (default)
0 1 : Enable (Detect the leading edge
plus right and left edges of paper)
1 0 : Enable (Detect the leading edge
of paper)
1 1 : Disable (No paper detection)
0: Disable (default)
0: Disable (default)
No. 7 8
0 0 : Detect both the leading edge and
width of paper (default)
0 1 : Detect both the leading edge and
width of paper
1 0 : Detect only the leading edge of
paper
1 1 : No detection
1: Enable
1: Enable
1: Enable
Confidential