Paper Feed Motor - Brother DCP-J4110DW Service Manual

9.33 Paper Feed Motor

(1) Remove the two screws (TAPTITE CUP B M3x10) and two screws (SCREW BIND
M3x6), remove the two CR guide rail springs, and remove the CR guide rail.
CR guide rail spring
"b"
Note: Do not place the removed CR guide rail with the recording paper holder down.
CR guide rail
"b"
Wrong
CR guide rail
Recording paper holder
CR guide rail spring
(Rear)
3-112
"a"
"a"
(Front)
Lower cover
"a": TAPTITE CUP B M3x10
"b": SCREW BIND M3x6
Correct
Recording paper holder
CR guide rail
(3_098_E)
(3_099_E)
Confidential