Retrieving The Equipment Log Information - Brother DCP-J4110DW Service Manual

2.4

Retrieving the Equipment Log Information

Function

This procedure retrieves the log information from the machine to the connected PC as
electronic data.
Operating Procedure

(1) Switch your PC on.
(2) Create an arbitrary folder in the C: directory and save the readback tool (rb2k03.exe) and
PJL command file (brmainten_77.pjl) in that folder.
Note: The rb2k03.exe is available only in windows XP.
(3) Switch the machine to the maintenance mode. (Refer to
(4) Connect the machine to the PC using a USB cable.
(5) On the PC, start Command Prompt and change to the directory where the readback tool is
located.
(In the example below, a "SendPJL" folder is created in the C: directory and the readback
tool is saved in that folder.)
(6) In Command Prompt, type
press the Enter key.
Note: Be sure to enter a space to the points marked with an asterisk (*) shown below.
rb2k03.exe*brmainten_77.pjl*brmainten_77.txt*/T3
Otherwise, an error occurs.
brmainten_77.txt
(7) In Excel, open the created header/footer and delete texts added by the PJL stipulation.
rb2k03.exe brmainten_77.pjl brmainten_77.txt /T3
is created in the arbitrary folder.
5-77
Section 1.1 in this chapter.)
and
Confidential