Brother DCP-J4110DW Service Manual page 339

1 Real-time clock (RTC) check result *4
RTC backup check result *4
2
OK: Backup completed, NG: Backup failed
3 Model code
4 Country code
5 Checksum of WSW, PSW, USW, and FSW *4
6 Version of main firmware
7 Version of boot firmware *4
8 Serial number
9 Head property information
10 CIS type/Engine type/LCD type
11 PictBridge information *4
Ink drop count after replacement of ink
12
cartridge
13 Ink drop count after detection of "Ink Low"
Ink drop count for droplets jetted out onto the
14
platen *4
15 Total ink drop count from a new head
Ink cartridge change count (High-yield and
16
super high-yield ink cartridges)
Ink cartridge detection failure count (Cannot
17
Detect display count)
18 Total printed page count/Total jam count
19 Printed page count for paper size
Printed page count for PC print, copy, fax & list
20
& report, memory card, and test print
Printed page count for paper size and paper type
21
*1
Total page count in duplex printing/Jam count in
22 duplex printing/Paper pull-in roller cleaning
count in duplex printing
*1 The paper type is printed in the order of "Plain paper - Inkjet paper - Glossy paper."
*2 For details about the purge type, refer to Maintenance mode 76.
*3 For details about sensors, refer to Maintenance mode 32.
*4 Not required for servicing.
*5 0: No ink cartridge loaded
1: High-yield ink cartridge
2: Super high-yield ink cartridge
*: Unidentifiable ink cartridge
*6 Excluding the resets triggered by the following.
Maintenance modes 01 and 91
Maintenance mode 80 (Resetting the purge and flushing counts)
*7 Purge count after the waste ink full sensor comes ON.
23 Total page count in duplex printing
Printed page count for paper size and paper type
24
in duplex printing *1
25 Total printed label count/Total label jam count
Total print count in printing via manual feed
26
slot/Total jam count
ADF scanning count/ADF duplex scanning
count (for duplex scanning models only)/FB
27
scanning count/ADF jam count/FAX scanning
count/Scanner count
Home positioning error code of the CIS unit/
Home positioning detection log data (See
28
Maintenance code 80. Refer to
this chapter.)
Purge count/sensor purge count *7/wipe count/
29
black flushing count/color flushing count
30 Purge count (black) *2
31 Purge count (color) *2
32 Total power-ON time
33 Power-ON count
Machine error history (Error code : Date of
34 occurrence : Machine temperature ºC at the time
of occurrence)
Communications error history (Error code :
35
Date of occurrence)
36 Initial purge log *4 (FF: Normal end)
37 Machine information backup file version *4
38 Sensor status *3
39 Ink cartridge type loaded in each slot *5
40 Executed maintenance modes *4
41 Executed special maintenance modes *4
42 LCD error *4
Reset count *6/Power-ON duration at the time
43
of last reset (Total power-ON hours)
Operation start date of the machine (Current
44 date when the user operates the machine first
after unpacking)
5-60
Section 1.3.32 in
Confidential