Document Jam - Brother DCP-J4110DW Service Manual

4.7.3 Document jam

Document jam in adjacent area of ADF cover or in paper ejector part

User Check
- Check that document is loaded correctly in the document tray.
- Adjust the document guide to match the document size.
- Check that the document shorter than the specified size is not loaded.
- Check that thickness of the document is 64 to 90 g/m
- Check that the number of documents loaded in the document tray is within specified volume.
- Close the ADF cover securely.
Step
Foreign materials in adjacent area
1
of ADF cover
ADF cover ASSY not mounted in
2
place
Upper ADF chute not mounted in
3
place
Separation pad holder ASSY not
4
mounted in place
Separation pad spring not
5
mounted in place
Ejection film not mounted in
6
place
Document scan position actuator
7
not mounted in place
ADF cover ASSY damaged,
8
broken
Upper ADF chute damaged,
9
broken
ADF separation pad holder ASSY
10
defective
ADF separation pad spring
11
defective
12 Ejection film damaged, broken
13 Main PCB defective
Cause
Remove foreign materials.
Set the ADF cover ASSY into place.
Set the upper ADF chute into place.
Set the separation pad holder ASSY into place.
Set the separation pad spring into place.
Set the ejection film into place.
Set the document scan position actuator into place.
Replace the ADF cover ASSY.
Replace the upper ADF chute.
Replace the ADF separation pad holder ASSY.
Replace the ADF separation pad spring.
Replace the ejection film.
Replace the main PCB ASSY.
2-80
2
.
Solution
Confidential