If You Replace The Paper Feeding Related Parts And Maintenance Unit - Brother DCP-J4110DW Service Manual

6 IF YOU REPLACE THE PAPER FEEDING RELATED PARTS and
MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
- Paper feed roller
- Paper ejection roller
- Switchback roller
- Carriage motor
- Paper feed motor
- CR encoder strip
- PF encoder disk
- PF encoder sensor PCB ASSY
- CR timing belt
<Operations>
6.1 Check head nozzles (Maintenance mode 09)
6.2 Adjustment of vertical print lines/software correction for inclination/corrugation/ruled
lines (Maintenance mode 65)
6.3 Update paper feeding correction values (Maintenance mode 58)
6.4 Adjust margins in borderless printing (Maintenance mode 66)
6.5 Check printing
<Requirements>
(1) USB cable (one piece)
(2) PC (Windows
Create a temporary folder in the C drive.
(3) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(4) Maintenance driver (MaintenanceDriver.zip), if not installed
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract the
copied file and install it, referring to
PRINTER DRIVER"
(5) USB flash memory or SD card
(6) Print data (Corrugate_BHS13.prn) for adjustment of vertical print lines/software correction
for inclination, corrugation and ruled lines.
(7) Print data for adjusting paper feeding correction values
For A4-sized paper:
For letter-sized paper: pfadj1_LTR_BHS13.prn and pfadj2_LTR_BHS13.prn
(8) Print data for adjusting margins in borderless printing
For A4-sized paper:
For letter-sized paper: mediaadj_LTR_BHS13.prn
®
XP or later)
.
pfadj1_A4_BHS13.prn and pfadj2_A4_BHS13.prn,
mediaadj_A4_BHS13.prn
- Switchback roller belt
- Paper ejection roller belt
- Registration sensor PCB ASSY
- Carriage PCB ASSY
- Platen
- Platen foam
- Flushing box
- Flushing base
- Maintenance unit
APPENDIX 3. "INSTALLING THE MAINTENANCE
4-24 Confidential