Carriage Motor Assy - Brother DCP-J4110DW Service Manual

9.29 Carriage Motor ASSY

(1) Remove the belt tension spring and the guard film spring.
(2) Remove the two screws (SCREW BIND M3x6) and the screw (TAPTITE CUP S M3x6)
and take the carriage motor ASSY off the CR frame ASSY.
(3) Remove the two screws (SCREW BIND M3x6) and take the carriage motor ASSY off the
motor bracket.
CR frame ASSY
Assembling Note: Tighten screw "C" (TAPTITE CUP S M3x6) temporarily. After setting the
head/carriage unit and the CR timing belt, tighten screw "C" firmly.
Belt tension spring
Guard film spring
"a"
"b"
"a"
"a"
"a"
Motor bracket
Carriage motor ASSY
"C"
3-106
"a": SCREW BIND M3x6
"b": TAPTITE CUP S M3x6
(3_088_E)
(3_089_E)
Confidential