Customizing Destinations (Maintenance Mode 74) - Brother DCP-J4110DW Service Manual

1.3.27 Customizing Destinations (Maintenance mode 74)

< Function >
This procedure customizes the machine according to settings of the language, functions, and
worker switches.
< Operating Procedure >
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The "Select 74?" appears on the LCD.
(2) Press the Mono Start key to display the current settings on the LCD.
(3) Enter the desired customizing code.
(4) Press the Mono Start key to save the new setting and return the machine to the initial stage
of the maintenance mode.
If the destination is changed, the "PLS UPDATE PROG" appears on the LCD. Load the
latest firmware (refer to
(5) Pressing the Stop key during the above procedure returns the machine to the initial stage of
the maintenance mode without saving the customizing code.
Note: If no keys are pressed for at least one minute with any display state, the machine
automatically returns to the initial stage of the maintenance mode.
< Destination Customizing Codes List >
DCP-J4110DW
MFC-J4310DW
MFC-J4410DW
MFC-J4510DW
MFC-J4610DW
MFC-J4710DW
MFC-J2310
MFC-J2510
Chapter 4, Section
USA Canada
- -
0001 0002
0101 0102
0001 0002
0201 0202
0001 0002
- -
- -
1.3).
Brazil Argentina
- -
0042 0036
- -
0042 0036
- -
- -
- -
- -
5-52
Chile Germany
Austria
- 0003
0036 -
- 0103
0036 0003
- 0203
- 0003
- -
- -
Confidential