Brother DCP-J4110DW Service Manual page 49

Error
Code
42 Head voltage does not turn OFF.
Head thermistor defective
43 Head thermistor detects -20 degree-C or less and 80 degree-C or more when
power is on.
44 Head driver IC detects abnormal temperature during operation or stand-by.
46 Purge count or flushing count overflown.
48 Head flat cable detected to be not correctly inserted.
49 Head voltage does not raise.
4D Ink absorber full sensor harness detected to be not correctly inserted.
4F Head voltage drops too quick.
50 The purge cam switch is not switching ON/OFF.
52 Failed to detect the origin of the purge cam.
5A Abnormal stop of purge cam being driven
5B Pump of maintenance unit stopped abnormally during exhaustion/suction.
Excessive current protection activated for the driver IC during purge cam
5D
operation.
5E Excessive current protection activated for the driver IC during pump operation.
67 Switchback sensor detects no recording paper tray state.
75 Head/carriage unit cannot shift to head capping position.
76 Head/carriage unit cannot shift to head uncapping position.
7E Head property information not input.
Recording paper size error (during FAX/list printing)
80
Registration sensor, recording paper width sensor detect unspecified papers.
Recording paper size error (other than FAX/list printing)
81
Registration sensor detects papers smaller than specified size.
Paper jam
82
Recording paper width sensor cannot detect leading edge of recording papers.
Paper jam
84 Registration sensor stays in paper feeding state even after completion of paper
ejection action.
Paper jam
87 Switchback sensor stays in paper feeding state even after completion of paper
ejection action.
Contents
2-12
Refer to
page:
2-36
2-36
2-37
2-37
2-37
2-38
2-38
2-39
2-39
2-40
2-41
2-41
2-41
2-41
2-42
2-43
2-43
2-43
2-44
2-45
2-45
2-46
2-46
Confidential