Testing The Printer; Testing The Position Of Thermal Printer Head - ELCOM Euro-50T Mini User Manual

Testing the printer

The printer's self-test will print out the entire set of characters in standard size with the related hexadecimal
code on both the receipt ribbon and the journal ribbon.
Procedure for initiating the printer's self-test:
Sequence of steps
In the P-mode press
menu for the printer test (P-mode – Sys. parameter – Tests):
Confirm by pressing
gister's character set on the thermal ribbon.
After successful completion of the test, the display reads:

Testing the position of thermal printer head

The display will show the current position of the printer head. Movement of the head's lifting mechanism
changes the depiction of the head position on the display according to the actual position of the head's
lifting mechanism.
Procedure for initiating the test:
Sequence of steps
In the P-mode, press
menu for testing the position of the thermal printer head (P-mode
– Sys. parameter – Tests):
Confirm by pressing
display will show:
If the printer head is lifted, the display will show:
Complete the test by pressing
 
or and press

TOTAL . The printer will print out the cash re-
 
or and press

TOTAL . If the printer head is in place, the

TOTAL .

TOTAL to enter the

TOTAL to enter the
Helpful advice
Display
Tests
Printer
Printer
working...
Test OK
Display
Tests
Head position
Head OK
Head raised
Test OK
81