Edge
4.2.3
Step 3: Restore Default Settings
When first deploying an Edge, it is recommended to perform a factory reset to initialize
the system parameters.
Factory Reset
Web:
1. Login to the Edge Web interface
Configuration->Factory Defaults
2. Click
Telnet:
1. Login to the Edge Telnet interface
2. Enter the command:
save defaultconfig
Long Reset
If the IP address, username or password of the Edge is unknown, use the 'long reset'
procedure to access the Web or Telnet interface: Refer to the RDL-3000 Family Users
Guide for a detailed description of this operation.
4.2.4
Step 4: Install Options Key
Options keys (a string of numbers, letters, and dashes) enable Edge features including
the maximum uncoded burst rate (UBR) and frequency ranges. Options keys are
encoded based MAC address, making each key unique to a specific Edge. The options
key enables specific system parameters and must be entered before the Edge is put in-
service.
70-00204-01-01
INSTALLATION GUIDELINES
Figure 18: Installation: Configuration - Login Screen
Proprietary Redline Communications © 2015
Page 33 of 56
May 19, 2015