Reference; Power Over Ethernet (Poe) Device; Dc-Dc Poe; Ethernet Port - Redline RDL-3000 Installation Manuallines

Edge
5

Reference

5.1

Power Over Ethernet (PoE) Device

5.1.1

DC-DC PoE

The Power over Ethernet (PoE) power injector provides power to the wireless terminal
using spare conductors on the Ethernet cable. The power input may be 10-30 VDC. All
Ethernet conductors are isolated (ETH and PoE) and have surge protection circuitry.

Ethernet Port

Connect this port to to the local 10/100Base-T network device. Data signals are passed
transparently between this port and the PoE port.

PoE Port

Connect this port to to the cable leading to the wireless terminal Ethernet port.
the Ethernet cable at the point of cable ingress into the shelter or cabinet. Refer to the
installation section for details.
70-00204-01-01
INSTALLATION GUIDELINES

Figure 30: Reference: DC-DC PoE Features

: System installation must include a dedicated surge protection device for

Figure 31: Reference: POE ETH Port Pin Assignment

Proprietary Redline Communications © 2015
Chapter 6
Page 47 of 56 May 19, 2015