Mercedes-Benz 190D 2.2 1984 Owner's Manual page 71

R eplacing bulbs:
B ulb fo r tu rn signal, p arking, side
m arker and sta n d in g lam p (21/5 W/
32/3 cp):
T urn bulb so cket (11) w ith lamp
bulb to the le ft and pull o u t socket.
Push lam p bu lb into socke t and
tu rn to the left and pull o u t bulb.
Sealed B eam /H alogen headlam p:
Pull cover (4) up to release it from
bracket.
D iscon nect p lug (8) and disengage
clam p (7).
Take o u t sealed beam to g e th e r w ith
retaining fram e to w a rd s the fro n t.
Press o ff fram e from sealed beam.
Fog lam p b ulb (H 3):
D isengage clam p (6) and rem ove
cover (5). D isconn ect plug (10), d is­
engage retaining clip and rem ove
bu lb (9).
Tail Lamp Assem blies
1 Side m arker lam p (10 W/6 cp)
2 Turn signal lam p (21 W/32 cp)
3 S top lam p (21 W/32 cp)
4 Tail, p a rkin g and sta n d in g lam p
(10 W/6 cp)
5 B acku p lam p (21 W/32 cp)
T urn both lo cks in the tru n k to the
left as fa r as the stop and detach
lam p bracket. To replace the bulbs,
depress, tu rn to the le ft and remove.
License Plate Lamps
(5 W fe sto o n lamp)
Loosen both the se cu rin g screw s
(1) and take o u t lamp.
<
67