Gprs Module - Libelium Waspmote Technical Manual

Hide thumbs Also See for Waspmote:
Table of Contents

Advertisement

16. GPRS module

Waspmote can integrate a GSM (Global System for Mobile communications) / GPRS (General Packet Radio Service)
module to enable communication using the mobile telephone network.
Model: SIM900 (SIMCom)
Quadband: 850/900/1800/1900 MHz
TX power: 2 W (Class 4) 850/900 MHz, 1 W (Class 1) 1800/1900 MHz
Sensitivity: -109 dBm
Antenna connector: U.FL
External antenna: 0 dBi
Figure: GPRS module
This module can carry out the following tasks:
Making/Receiving calls
Making 'x'-second lost calls
Sending/Receiving SMS
Single connection and multiple connections TCP/IP and UDP/IP clients
TCP/IP server
HTTP service
FTP service (downloading and uploading files)
This model uses the UART1 at a baudrate of 57600 bps speed to communicate with the microcontroller.
Related API libraries: WaspGPRS_Pro.h, WaspGPRS_Pro.cpp , WaspGPRS_Pro_core.h and WaspGPRS_Pro_core.
cpp
All information about their programming and operation can be found in the
All the documentation is located in the
Note: A rechargeable battery must be always connected when using this module (USB power supply is not enough).
Development section
in the Libelium website.
-101-
GPRS module
GPRS Programming
Guide.
v8.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Waspmote and is the answer not in the manual?

Table of Contents