搬運機頭與送釦機
( 1 將 保 護 機 台 的 上 方 保 麗 龍 取 出 ,
)
當 要 取 出 機 台 時 須 由 二 至 三 人 協
助 搬 運 , 兩 人 將 雙 手 分 別 伸 入 機
台 的 底 部 、 與 、 , 兩 手 出
力 需 平 衡 , 身 體 與 膝 蓋 彎 曲 , 確
認 提 起 沒 問 題 後 , 再 慢 慢 起 身 ,
若 中 途 發 現 雙 手 無 法 支 撐 重 量
時 , 請 由 第 三 者 協 助 搬 運 或 輕 輕
放 至 穩 定 平 台 , 並 小 心 手 指 不 要
被 壓 傷 ; 請 更 換 適 當 人 員 , 絕 對
不 可 強 行 搬 運 , 以 免 發 生 身 體 傷
害 之 危 險 。
( 2)搬 運 全 程 , 請 穿 著 安 全 鞋 。
3
4
) (圖 )
REMOVE THE MACHINE HEAD
AND THE FEEDING
BUTTON MACHINE
(
1) Take out the polystyrene above the
machine. It is needed 2 to 3 people to
move out the machine together. Two
people stretch both hands into the
bottom
of the machine with the balanced
strength. The knees and bodies
should be bent. After assuring the
state,move up the machine slowly. It
is necessary to ask for help if you
(圖
cannot stand the weight. Slowly put
on the flat table and be careful not to
hurt your fingers. Ask for assistance if
you need. Do note remove with force
for avoiding danger.
(2) Please put on safety shoes during the
moving.
-5-
Introduction
,
,
, and
of the bottom
( Fig.3)( Fig.4)
圖3/Fig. 3
P5