Menu Layout And Navigation - AUMA SAEx 07.2 Operation Instructions Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
ACExC 01.2 Intrusive HART
Backlight
6.3.1.

Menu layout and navigation

Groups
SAREx 16.2 Control unit - electromechanical
Set the selector switch [5] to position 0 (OFF) when navigating through the menu.
The bottom row of the display [6] serves as navigation support and explains which
push buttons [1 4] are used for menu navigation.
Figure 24:
[1 4] Push buttons or navigation support
[5] Selector switch
[6] Display
Table 10: Important push button functions for menu navigation
Push buttons Navigation sup-
port on display
Up ▲
[1]
Down ▼
[2]
Ok
[3]
Save
Edit
Details
[4] C Setup
Esc
The display is illuminated in white during normal operation. The backlight turns
to red under fault conditions.
The screen illumination is brighter when operating a push button. If no push
button is operated for 60 seconds, the display will become dim again.
The indications on the display are divided into 3 groups:
Functions
Change screen/selection
Change values
Enter figures from 0 to 9
Change screen/selection
Change values
Enter figures from 0 to 9
Confirm selection
Save
Enter <Edit> menu
Display more details
Enter Main menu
Cancel process
Return to previous display
Operation
31