Telnet Session Options - Paradyne Hotwire 8774 User Manual

Management and Communication Options Menu
The Management and Communication Menu allows you to access the following:

Telnet Session Options

The Telnet session configuration options control whether a Telnet session is
allowed through an interconnected IP Network. If allowed, these options
determine what level of security to apply to the session to control access. Only
one Telnet session is allowed at a time. Initial values are determined by the
configuration you currently have loaded. To access the Telnet Sessions Options
screen, follow this menu selection sequence:
Î
8774-A2-GB20-10
H
Telnet Session Options, Table A-5
H
SNMP Trap Options, Table A-6
H
General SNMP Management
H
SNMP NMS Security
Main Menu Configuration
Management and Communication
main/config/management/telnet
Slot 4
Telnet Session:
Telnet Login Required:
Session Access Level:
Inactivity Timeout:
Disconnect Time (Minutes)
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Table A-5. Telnet Session Options
Telnet Session
Possible Settings: Enable, Disable
Default Setting: Enable
Specifies if the 8774 Termination Unit will respond to a Telnet session request from a
Telnet client on an interconnected IP network.
Enable – Allows Telnet sessions between the unit and a Telnet client.
Disable – No Telnet sessions allowed.
December 1998
Options, Table A-7
Options, Table A-8
Load Configuration From
Telnet Session
TELNET SESSION OPTIONS
Configuration Option Tables
Hotwire
Model: 8774
Enable
Enable
Administrator
Enable
5
Î Î
MainMenu Exit
A-9