Paradyne Hotwire 8774 User Manual page 36

Initial Startup and Configuration
"
3-10
Procedure
To download firmware:
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded.
The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name. The total path
name length can be up to 128 characters.
2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP
server IP address.
The first three digits of the IP address cannot be 000 or greater than 223.
3. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.
Press Enter.
When the data transfer is complete, the Transfer Status field changes to
Completed successfully.
4. Press the Escape key to return to the Control menu. Select Apply Download.
5. On the Apply Download screen, type Yes to reset the card and activate the
code.
December 1998 8774-A2-GB20-10