Configuration Option Tables
Table A-4. System Options (2 of 2)
Telco Initiated Loopback
Possible Settings: Enable, Disable
Default Setting: Enable
Determines if the unit will respond to inband or bit oriented protocol loopback
commands on the DSX-1 interface.
Enable – The unit will respond to inband loopback commands.
Disable – The unit will not respond to inband or bit oriented protocol loopback
commands.
Remote Telco Loopback
Possible Settings: Enable, Disable
Default Setting: Disable
Determines if the unit will perform a Telco initiated loopback on just the local unit or if
the loopback will be performed on the remote DSL unit.
Enable – The loopback will be in the remote unit.
Disable – The loopback will be local.
A-8
December 1998
8774-A2-GB20-10