Paradyne Hotwire 8774 User Manual page 98

Cables and Pin Assignments
Hotwire 8600 DSLAM Telco 50-pin Connector
Pinouts for DSL Loops
1
25
26
97-15526
50
C-2
The Telco 50-pin LINE receptacle on the front panel of the 8600 DSLAM
provides the 2-wire loop interface from each DSL port to the MDF. The following
table lists the pin assignments for each of these interfaces.
NOTE:
When the 8600 chassis is the base chassis, the MCC is installed in Slot 1
and the Tip and Ring wiring for Slot 1 is not active.
Also, Pins 13 through 25 and 38 through 50 of all Hotwire 8600 chassis
are not used.
CONNECTOR
(DSL Slot, Port Number)
Slot 1, Port 1
Slot 1, Port 2
Slot 1, Port 3
Slot 1, Port 4
Slot 2, Port 1
Slot 2, Port 2
Slot 2, Port 3
Slot 2, Port 4
Slot 3, Port 1
Slot 3, Port 2
Slot 3, Port 3
Slot 3, Port 4
December 1998
CONNECTOR PINS
(Tip, Ring)
1, 26
2, 27
3, 28
4, 29
5, 30
6, 31
7, 32
8, 33
9, 34
10, 35
11, 36
12, 37
8774-A2-GB20-10