H Network Interface Options Menu - Paradyne Hotwire 8774 User Manual

Configuration Option Tables
Network Interface Options Menu
Î
A-2
For Network Interface Options, refer to Table A-1. To access the Network
Interface Options screen, follow this menu selection sequence:
Main Menu Configuration
main/config/network
Slot 4
Port 3
Margin Threshold:
Excessive Error Rate Threshold:
Peer IP Address:
Circuit Identifier:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Table A-1. Network Interface Options (1 of 2)
Margin Threshold
Possible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db,
7db, 8db, 9db, 10db
Default Setting: 0db
Determines the level, expressed in decibels, at which a signal-to-noise margin condition
is recognized.
–5db to 10db – Sets the margin threshold to this value.
Excessive Error Rate Threshold
Possible Settings: 1E–4, 1E–5, 1E–6, 1E–7, 1E–8, 1E–9
Default Setting: 1E–6
Determines the error rate at which an excessive error rate (EER) condition is
recognized. The rate is the ratio of the number of CRC errors to the number of bits
received in a certain period.
December 1998
Current Configuration
NETWORK INTERFACE OPTIONS
Network
Hotwire
Model: 8774
–3db
1E–6
111.255.255.000 Clear
Clear
Î Î
MainMenu Exit
8774-A2-GB20-10