Paradyne Hotwire 8774 User Manual page 31

Configuration Edit/Display
Î
8774-A2-GB20-10
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu
selection sequence:
Main Menu Configuration
– or –
Main Menu Configuration
main/config/edit
Slot: 4
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Select . . . To Access the . . .
Network Network Interface
DSX-1 Synchronous Data Port
Table A-2
Copy Ports Copy Port
System System
Options
H
Management Telnet Session
and Table A-5
Communication
H
SNMP Traps
H
General SNMP Management
Options, Table A-7
H
SNMP NMS Security
Table A-8
December 1998
Current Configuration
Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
DSX-1
Copy Ports
System Options
Management and Communication
Options, Table A-1
Options,
Options, Table A-3
Options, Table A-4
Options,
Options, Table A-6
Options,
Initial Startup and Configuration
Hotwire
Model: 8774
MainMenu Exit
To Configure the . . .
T1 SDSL network interface
Ports 1–4.
DSX-1 interface Ports 1–4.
T1 SDSL network and
DSX-1 interface ports by
copying options from port to
port.
General system options of
the unit.
Management support of the
unit through SNMP and
Telnet.
Î Î
3-5