Table of Contents
Advertisement
Logging In to the Hotwire DSLAM
You can log in to the Hotwire DSLAM system using either a local VT100-compatible
terminal or a remote Telnet connection.
After you enter your user ID and password, the system displays the Hotwire Chassis
Main Menu. See your DSLAM Management Communications Controller (MCC) card
documentation for information about selecting the unit from the MCC card selection
screen.
Entering Identity Information
After accessing your unit for the first time, use the Change Identity screen to determine
SNMP administrative system information that will be displayed on the Identity screen of
the Status branch. To access the Card Identity screen, follow this menu selection
sequence:
Main Menu → Control → Change Identity
Configuring the Unit
Configuration option settings determine how the unit operates. Use the Configuration
branch of the Hotwire Termination Unit menu to display or change configuration option
settings.
The unit is shipped with factory settings in the Default Factory Configuration area. If the
factory default settings do not support your network's configuration, customize the
configuration options for your application.
Accessing and Displaying Configuration Options
To display the configuration options, you must first load a configuration option set into
the edit area.
To load a configuration option set into the configuration edit area, follow this menu
selection sequence:
Main Menu → Configuration (Load Configuration From)
Make a selection by placing the cursor at your choice and pressing Enter.
If you select . . .
Current
Configuration
Configuration
Loader
Default Factory
Configuration
Then . . .
The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
The Configuration Loader screen is displayed allowing you to
upload or download configurations from a TFTP server.
The default factory configuration is loaded and the
Configuration Edit/Display menu screen appears.
7
Advertisement
Table of Contents
