Î
Î
8774-A2-GB20-10
main/control/admin_logins
Slot: 4
New logins will not become permanent until saved
through the "ADMINISTER LOGINS" screen!
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions
Save
PgUp
PgDn
3. Create the login by entering the following fields. Login IDs and passwords are
case-sensitive.
On the Login Entry
screen, for the . . .
Login ID
Password
Re-enter Password
Access Level
NOTE:
Assign at least one Administrator-level Login ID. Full access is necessary
to make configuration option changes and administer logins.
4. Press Ctrl-a to switch to the screen function key area below the dotted line.
Select Save and press Enter.
5. When Save is complete, Command Complete appears at the bottom of the
screen.
6. If additional logins are required, repeat Steps 3 through 5.
7. When all logins are entered, press Esc to return to the Administer Logins
screen.
8. Select Save and press Enter.
December 1998
LOGIN ENTRY
Login ID:
newuser
Password:
e34t136
Re-enter Password:
e34t136
Access Level:
Administrator
WARNING
ESC for previous menu
Enter . . .
1 to 10 ASCII printable characters (hex21 through 7E).
Blanks are not allowed.
1 to 10 ASCII printable characters that can consist of
0–9, a–z, A–Z, # (pound), . (period), – (dash), and
/ (slash).
1 to 10 ASCII printable characters characters that can
consist of 0–9, a–z, A–Z, # (pound), . (period),
– (dash), and / (slash).
Administrator, Operator
Security
Hotwire
Model: 8774
Î Î
Î Î
MainMenu
Exit
New
Delete
7-3